You are not logged in.
Pages: 1
Hey guys
Sorry for posting from mobile, but i decided to get a new tplink modem, i put all the parameters however my problem is that the router connects (pppoe) it gets an ip address and the dns servers but without gateway, any idea?
Ogero support is not answering for 3 hours
post a screenshot of your config screen
post a screenshot of your config screen
here you go
PS: I put the old MAC address (Mac Clone)
PS2: in the status tab, i can see the IP address, the Subnet Mask and the DNS servers that the Router acquired, however, there is no default gateway...
Thank you man
Last edited by ironman (November 13 2017)
random-username wrote:post a screenshot of your config screen
here you go
PS: I put the old MAC address (Mac Clone)
PS2: in the status tab, i can see the IP address, the Subnet Mask and the DNS servers that the Router acquired, however, there is no default gateway...Thank you man
You don't need a mac clone. Make sure the vpi/vci is set to 0-35.
It didnt connect at all without the mac clone...
It didnt connect at all without the mac clone...
I change so many modems often, I never for once needed to clone a mac to make it connect not to mention never even got a modem that has that feature anyway.
Pages: 1