• Hardware

  • DxRacer K -Series , King Series Chair

Georges00 wrotePcandparts prices are cheaper than the USA. Weird.
Supply Increase: price decreases, quantity increases ( a Deal with PC&Parts) as Zotac Did , to penetrate the market for a new product and mass shipment the supplier decrease the price with the re-seller.
Always go with a German product over an American one. My concern is that Macrotronics usually adds about 40-60% to the real price it would be fine if I had to pay an extra 15% but their prices are extremely high in everything they sell. There is absolutely no way they'd offer the leather noble chairs for $550 maybe $800.
In case any one wants to argue how their prices are justified please look at this http://www.macrotronics.net/product_info.php/pny-graphics-card-geforce-gtx980ti-ddr5-6gb-p-10073
nas93 wroteAlways go with a German product over an American one. My concern is that Macrotronics usually adds about 40-60% to the real price it would be fine if I had to pay an extra 15% but their prices are extremely high in everything they sell. There is absolutely no way they'd offer the leather noble chairs for $550 maybe $800.
In case any one wants to argue how their prices are justified please look at this http://www.macrotronics.net/product_info.php/pny-graphics-card-geforce-gtx980ti-ddr5-6gb-p-10073
The link is for: PNY Graphics Card GeForce GTX980Ti DDR5 6GB
@Tech Guru: I'm thinking of getting this one: http://www.noblechairs.com/en/epic-real-leather-gaming-chair-brown-black/

It looks very premium (like a supercar seat).

The only bad bad thing I heard about noble chairs is that the back is very flat rather than arched (as our backs). So might feel less comfortable than DXRacer or Maxnomic.

Were you able to test the chair before? I hope you did before buying
MrClass wrote@Tech Guru: I'm thinking of getting this one: http://www.noblechairs.com/en/epic-real-leather-gaming-chair-brown-black/

It looks very premium (like a supercar seat).

The only bad bad thing I heard about noble chairs is that the back is very flat rather than arched (as our backs). So might feel less comfortable than DXRacer or Maxnomic.

Were you able to test the chair before? I hope you did before buying
Mate , both DX Racer or Noble Chairs are not very ergonomic for the back curvature - the lower lumber cushion and the neck rest enhance the posture of the body. I used many chairs , if the high end ones , are not 100 % ergonomic. Your choice is perfect indeed and I will go with a two noble chairs frankly - PU for office and Leather for Gaming.
nas93 wroteAlways go with a German product over an American one. My concern is that Macrotronics usually adds about 40-60% to the real price it would be fine if I had to pay an extra 15% but their prices are extremely high in everything they sell. There is absolutely no way they'd offer the leather noble chairs for $550 maybe $800.
In case any one wants to argue how their prices are justified please look at this http://www.macrotronics.net/product_info.php/pny-graphics-card-geforce-gtx980ti-ddr5-6gb-p-10073

550 USD for leather when a deal between NobleChairs and Macrotronics is set to penetrate the Lebanese Market is very possible. However , scepticism is a note to take. Only time will tell ;)
Tech Guru wrote
nas93 wroteAlways go with a German product over an American one. My concern is that Macrotronics usually adds about 40-60% to the real price it would be fine if I had to pay an extra 15% but their prices are extremely high in everything they sell. There is absolutely no way they'd offer the leather noble chairs for $550 maybe $800.
In case any one wants to argue how their prices are justified please look at this http://www.macrotronics.net/product_info.php/pny-graphics-card-geforce-gtx980ti-ddr5-6gb-p-10073

550 USD for leather when a deal between NobleChairs and Macrotronics is set to penetrate the Lebanese Market is very possible. However , scepticism is a note to take. Only time will tell ;)
Honestly, a proper office chair with good padding is far more superior than these 'gaming' chairs. To begin with they are marketed heavily towards e sports, but in case of just browsing the internet and daily use besides gaming they will suck. Plus you can never be sure if they are comfortable even if you try them out unless they'll let you take it home and try it for a day.
nas93 wrote
Tech Guru wrote
nas93 wroteAlways go with a German product over an American one. My concern is that Macrotronics usually adds about 40-60% to the real price it would be fine if I had to pay an extra 15% but their prices are extremely high in everything they sell. There is absolutely no way they'd offer the leather noble chairs for $550 maybe $800.
In case any one wants to argue how their prices are justified please look at this http://www.macrotronics.net/product_info.php/pny-graphics-card-geforce-gtx980ti-ddr5-6gb-p-10073

550 USD for leather when a deal between NobleChairs and Macrotronics is set to penetrate the Lebanese Market is very possible. However , scepticism is a note to take. Only time will tell ;)
Honestly, a proper office chair with good padding is far more superior than these 'gaming' chairs. To begin with they are marketed heavily towards e sports, but in case of just browsing the internet and daily use besides gaming they will suck. Plus you can never be sure if they are comfortable even if you try them out unless they'll let you take it home and try it for a day.
You have a point how ever not of Spotnet or Ground Zero are complaining from them (prolonged hours of competitive multiplayer tournaments . May you reference me to a shop in Lebanon that sells real ergonomic office chairs.
4 months later
DXRacer OH/FH00/NR Formula Series Red & black 3D Professional Gaming Chair
\ For Only $290.00 //

(PC & Parts Weekly Special Offers newsletter)
Bro, can you confirm that this chair you bought is the Racing series?
Cause all the racing series in their list, it says in the description (or rather the image representations) that the chair comes with a normal head/neck cushion, but the one you have has a U shaped neck cushion.
Hey guys, i think branded gaming chairs are too expensive - and i didn't really notice any difference between them and other non-branded gaming chairs i found in China (and Lebanon, just took me months to find them). In fact, I have a very good source and already selling them for good prices. They are exactly the same as the white DXRacer photo posted above. I'm currently equipping a friend's gaming lounge with some of them - message me in private if you want to know more.

I also do believe that DXRacer and other gaming chair brands don't really put much effort in designing l33t gaming chairs, they're just picking up quality gaming chairs from good chinese manufacturers and putting their logos on them
4 days later
AVOlio wrote
Bro, can you confirm that this chair you bought is the Racing series?
Cause all the racing series in their list, it says in the description (or rather the image representations) that the chair comes with a normal head/neck cushion, but the one you have has a U shaped neck cushion.
BUUMP @manowar
8 days later
Yeah its a dxracing series , when i get at home , ill give u the exact model of the one that i have
ManOwaRR wrotehttp://www.pcandparts.com/gamingchairs-OHRM1NR.htm

Thats my model its racing shield series for 365$
Although the link seems not working with me, I knew which one was it.

There are 2, green and black / red and black.

But oddly, in the description page, in the images it shows a regular cushion and not U shaped.
DXRacer OH/RM1/NR Racing Shield Series Red & Black 3D Straight Arms/Conventional Tilt Mechanism/Aluminium Base/Carbon Look Vinyl and PU cover/2" PU Casters