ahk40a wrote
HzSamer wroteFinally switched to VDSL

https://www.speedtest.net/result/9215350125.png
This speed should be attained by ADSL, on VDSL you should get much better speeds. kindly, investigate the line values.
When ogero did the feasibilty test, the reslut was 33Mbps for download and 19mbps for upload. Now I am syncing with 29Mbps but the real speed is around 22mbps. Also, the upload speed is 8Mbps only so they capped it.
HzSamer wrote
ahk40a wrote
HzSamer wroteFinally switched to VDSL

https://www.speedtest.net/result/9215350125.png
This speed should be attained by ADSL, on VDSL you should get much better speeds. kindly, investigate the line values.
When ogero did the feasibilty test, the reslut was 33Mbps for download and 19mbps for upload. Now I am syncing with 29Mbps but the real speed is around 22mbps. Also, the upload speed is 8Mbps only so they capped it.
I highly doubt they capped the download speeds but yes the upload is fine for 10mbps.

You should be able to download @ 27mbps not 22Mbps if you're syncing at 30mbps. Usually it's roughly 88-90% of the advertised speed due to overhead ( TM framing, pppoe and tcp headers.

Can you try try a download manager that allows multiple simultaneous streams like Internet Download Manager and try to download this test file :

http://speedtest.ftp.otenet.gr/files/test1Gb.db

If you need accurate download speed check your interface in Windows task manager. You should be able to hit 27Mbps easily.

Also does you modem support custom SNRM ? You SNR marging is 10dB if you can lower it to 7dB you could easily achieve a sync speed of 35Mbps.
I checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
Out of curiosity, are you still using the same ADSL filter/splitter ?
Kareem wrote
HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
Out of curiosity, are you still using the same ADSL filter/splitter ?
A very good question, but I doubt he is using it, as the sync is above 24Mbps.
Guys,

I installed a new cat6 cable from the Ogero box down the building straight to my room from the balcony.

I canceled out all the sockets in the house.
All I have now is one cat6 cable with an rj11 socket connected to the modem / router.

The thing is, I still want to hook the landline phone to the cable.

I tried using a splitter and filter.
But what it's doing is cutting my speed on vdsl in half.
I tried many combinations, and the speed keeps getting reduced.

Without phone : im getting 49mbps current rate / 10mbps current rate.

With phone : I'm getting 23mbps current / 5mbps current.


Any solutions??
AVOlio wroteGuys,

I installed a new cat6 cable from the Ogero box down the building straight to my room from the balcony.

I canceled out all the sockets in the house.
All I have now is one cat6 cable with an rj11 socket connected to the modem / router.

The thing is, I still want to hook the landline phone to the cable.

I tried using a splitter and filter.
But what it's doing is cutting my speed on vdsl in half.
I tried many combinations, and the speed keeps getting reduced.

Without phone : im getting 49mbps current rate / 10mbps current rate.

With phone : I'm getting 23mbps current / 5mbps current.


Any solutions??

I don't understand exactly what's going on. So how are you connecting your phone? What kind of filter or splitter are you using?

As far as I know, you can't use any random splitter. ADSL splitter usually contain a low pass filter and some also contain a filter that will block anything above 2 MHz. VDSL2 goes up to 12 MHz I believe...
AVOlio wroteGuys,

I installed a new cat6 cable from the Ogero box down the building straight to my room from the balcony.

I canceled out all the sockets in the house.
All I have now is one cat6 cable with an rj11 socket connected to the modem / router.

The thing is, I still want to hook the landline phone to the cable.

I tried using a splitter and filter.
But what it's doing is cutting my speed on vdsl in half.
I tried many combinations, and the speed keeps getting reduced.

Without phone : im getting 49mbps current rate / 10mbps current rate.

With phone : I'm getting 23mbps current / 5mbps current.


Any solutions??
In that case, you are using an ADSL splitter, you have to use a VDSL Splitter.
Where can I find vdsl splitters.
Kareem wrote
HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
Out of curiosity, are you still using the same ADSL filter/splitter ?
Yes, I was using the old one, then I tried the VDSL splitter that came with the modem. Also, I tried to plug the modem directly to the wall socket. All the same result.
Kareem wrote
HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
Out of curiosity, are you still using the same ADSL filter/splitter ?
Wouldn't it be better to test the speed using ethernet? He's currently testing through a wireless connection, so speeds might be slower no?
Hello all, so Ogero gave me the VDSL in Dohat Aramoun. There's a guy who came and tested my phone line quality inside the electricity room. He told me who told you that you can have vdsl? i told him Ogero. He was like you cant have vdsl you're so far from the central and you dont have an active cabinet in your region. Anyway im on vdsl now syncing same speed i used to get on adsl. Maximum 13 Mbit download 1 Mbit upload. Even though when i put my number in ogero's website. It gives me that my phone line can handle 19 mbit. And since year and a half i changed the phone line from my house to the box inside the electricity room. The guy installed me a cat5e line. So i dont know what's the problem with them. Finally i got my VDSL but not the way i wanted it.
Moudimadi wroteHello all, so Ogero gave me the VDSL in Dohat Aramoun. There's a guy who came and tested my phone line quality inside the electricity room. He told me who told you that you can have vdsl? i told him Ogero. He was like you cant have vdsl you're so far from the central and you dont have an active cabinet in your region. Anyway im on vdsl now syncing same speed i used to get on adsl. Maximum 13 Mbit download 1 Mbit upload. Even though when i put my number in ogero's website. It gives me that my phone line can handle 19 mbit. And since year and a half i changed the phone line from my house to the box inside the electricity room. The guy installed me a cat5e line. So i dont know what's the problem with them. Finally i got my VDSL but not the way i wanted it.

Post stats of modem.
AVOlio wroteWhere can I find vdsl splitters.
As far as i know, the modem needs to be directly connected to the phone line (which is what the 'modem' port does in the adsl/vdsl filter). The filter is only actually "filtering" the phone line, so shouldn't really matter.
Try a different filter, it may be broken or low quality. For example, i have one cheap Chinese filter that for whatever reason gives me 20% lower speed. Using the filter that came with the modem gave me near full speed.

Try your filter first connect the modem to it but not the phone. If the speed goes down, it is definitely a faulty filter and you change it.
If the speed still the same as without the filter, then it could be your phone. Try another phone (borrow one) and try it.
HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
For the CRC errors, you will get more on VDSL2, that's normal
I was getting around 2000 to 3000 during 1 day.
However, since the lock-down i am getting around 5000 per hour sometimes especially from noon till 7pm and then not more than 20 per hour max. (SNR is stable and above 8, i even tried to sync at lower speed and increase the SNR but the CRS errors weren't affected at all). I think it is a problem at the centrals (Mazraa Co) because there are too many people using the internet and talking and cross-talk are affecting the errors.(the connection is till stable and downloads speed aren't affected).
To put things into perspective, during new year eve, i got around 14000 CRCs per hour. Then on the first day of 2020, things were normal again.
Kareem wrote
Moudimadi wroteHello all, so Ogero gave me the VDSL in Dohat Aramoun. There's a guy who came and tested my phone line quality inside the electricity room. He told me who told you that you can have vdsl? i told him Ogero. He was like you cant have vdsl you're so far from the central and you dont have an active cabinet in your region. Anyway im on vdsl now syncing same speed i used to get on adsl. Maximum 13 Mbit download 1 Mbit upload. Even though when i put my number in ogero's website. It gives me that my phone line can handle 19 mbit. And since year and a half i changed the phone line from my house to the box inside the electricity room. The guy installed me a cat5e line. So i dont know what's the problem with them. Finally i got my VDSL but not the way i wanted it.

Post stats of modem.
TCM(Trellis Coded Modulation)
On
On
SNR Margin
9.7 dB
13.1 dB
Line Attenuation
26.9 dB
63.9 dB
Path Mode
FastPath
FastPath
Interleave Depth
1
1
Data Rate
13502 kbps
920 kbps
Max Rate
16700 kbps
971 kbps
Power
14.5 dbm
2.4 dbm
INP
0.9 symbols
0.0 symbols
INP-SHINE
-
-
INP-REIN
-
-
CRC
1533
62
wollyka wrote
HzSamer wroteI checked the speed before from the task manager and tested it on http://speedtest.tele2.net with IDM

The link you shared didn't reach more than 16mbps.

And my modem is TPlink TD-W9960 which is very basic one. I don't have such option like the Asus.

Do you think the CRC errors are high? On ADSL they were less than 100 and now are reaching 1800 in one hour.

https://i.imgur.com/RBXK4uD.png
For the CRC errors, you will get more on VDSL2, that's normal
I was getting around 2000 to 3000 during 1 day.
However, since the lock-down i am getting around 5000 per hour sometimes especially from noon till 7pm and then not more than 20 per hour max. (SNR is stable and above 8, i even tried to sync at lower speed and increase the SNR but the CRS errors weren't affected at all). I think it is a problem at the centrals (Mazraa Co) because there are too many people using the internet and talking and cross-talk are affecting the errors.(the connection is till stable and downloads speed aren't affected).
To put things into perspective, during new year eve, i got around 14000 CRCs per hour. Then on the first day of 2020, things were normal again.
Thank you for sharing this. I am also with Mazraa co.
I noticed that Ogero is throttling torrent from a week.

I can't download my files with more than 1MBps, and I am getting full speed on my seedbox with the same files.



Update:

The problem was because I set the limit of the upload speed to 1KB/s. The max download speed didn't exceed 1MB/s and when I was on ADSL I didn't think there is a problem. Once I removed the limit it jumped to the full speed.

HzSamer wroteI noticed that Ogero is throttling torrent from a week.

I can't download my files with more than 1MBps, and I am getting full speed on my seedbox with the same files.

https://i.ibb.co/gZBD85L/2020-04-06-03-59-25.png https://i.ibb.co/5nTS7c3/2020-04-06-05-02-40.png

Weired that is not happening to me at all. FTTH & 4Mbps Unlimited ( Now~ 5.6Mbps due to corona outbreak shift in speed for home quarantine)

Downloading a Lot (Games & Torrents)
Streaming -Mainly Netflix , IPTV , & YouTube
Gaming MP Games
24/7 IP Cameras Recording / 2 Full HD & Their NVR

All Stable & Fast
Tech Guru wrote
HzSamer wroteI noticed that Ogero is throttling torrent from a week.

I can't download my files with more than 1MBps, and I am getting full speed on my seedbox with the same files.

https://i.ibb.co/gZBD85L/2020-04-06-03-59-25.png https://i.ibb.co/5nTS7c3/2020-04-06-05-02-40.png

Weired that is not happening to me at all. FTTH & 4Mbps Unlimited ( Not ~ 5.6Mbps due to corona outbreak shift in speed for home quarantine)

Downloading a Lot (Games & Torrents)
Streaming -Mainly Netflix , IPTV , & YouTube
Gaming MP Games
24/7 IP Cameras Recording / 2 Full HD & Their NVR

All Stable & Fast
Am the same---I think my activity last month was close to 500 gigs of downloading/uploading and my torrents are downloading near the peak speed of 400 kB/s. Sometime I run into slow torrenting speeds, so I just restart utorrent and it goes back to normal. Apparently, some ports are better than others.