MrClass
This case is not designed for good airflow; doesn't even front fan mounts.
You can try to get the best out of it though.
Bottom fans should pull fresh cool air into the case so the air goes up
Don't know what's on the other side of the case, but fresh air should come outside to hit the radiator inside. the bottom fans will push the hot air to the top.
Top fans should pull the air from inside the case to outside as an exhaust
Back fans should pull the air from inside the case to outside as an exhaust
AVOlio
Thanks for the reply Mr class.
Your suggestion was my way to go, but for the radiator, I didn't want it to be intake cause I didn't want to turn the fans to the other side which will make the backside of the fans visible, which isn't appealing.
So I had to make the radiator outtake.
And based on that,
Bottom 3 fans are intake.
Top 3 fans are outtake
Radiator 3 fans outtake
2x80mm fans intake next to the cpu.
2x80mm fans outtake in the back cable management chamber. ( where the radiator dissipates all the heat).
Even with this,
Still have high temps on the cpu.
It's either the cooler, or I suck at adjusting and overclocking.