Check again, it went back to normal.
Feedback for Ogero
This is bad.. I got used to the huge quota and now this!AVOlio wroteCheck again, it went back to normal.
A lot of people are still working remotely, they should have extended the offer, but as usual nothing nice in this country lasts.
Bahij.M wroteThis is bad.. I got used to the huge quota and now this!AVOlio wroteCheck again, it went back to normal.
A lot of people are still working remotely, they should have extended the offer, but as usual nothing nice in this country lasts.
Exactly, I still can't travel and I'm working remotely. It's disappointing to see it's back to what they call " normal ".
Even worse, they don't have offers for A/VDSL above 200GB, only for fiber which doesn't make sense at all.
The quota is Doubled again on my end.
Yea me too I just noticedAVOlio wroteThe quota is Doubled again on my end.
Double quota till September 30
Anyone else was without internet this morning ?
It seems the generators related to many COs are running out of fuel ?
It seems the generators related to many COs are running out of fuel ?
- Edited
[delete]
DG wroteAnyone else was without internet this morning ?
It seems the generators related to many COs are running out of fuel ?
https://twitter.com/ikreidieh/status/1278178874837405697Imad Kreidieh wrote]Unfortunately, like many institutions in Lebanon, ogero is suffering a shortage of fuel supply to operate its generators. We are liaising with the ministry of energy to sort put the problem.
6 days later
Hello, Any one in Dawhet Aramoun, central Khaldeh having high VDSL Speeds? Ogero installed me Vdsl while im not eligible for it. Since 3 or 4 months till now. I'm still having same speed as i used to get on Adsl. I talked to them they said you're far from the central. Even though we have a cabinet here in our region a big one. They said maybe you're not related to this cabinet. So what should i wait for? When will i reach high speeds on Vdsl? Mr,Imad kreidieh once said that Vdsl speeds can reach up to 80Mbit. I'm having 13 max. Should we wait for another active cabinet or what? Or they have to install fiber to this cabinet in our area so we could get more Vdsl speed? Some explain please. Thank you.
I recently enabled ipv6 on my router, I did the http://test-ipv6.com/ the result was 10/10, ipv6 worked for maybe 2 hours then websites stopped loading or getting incomplete loading.
Did the ipv6 test again and this is the result I am getting

After many online research on the MTU issue, I found out that the PPPOE MTU max size on my router is 1492 (the max i can set it to) and Windows original Ethernet interface MTU size is 1500 so i changed the Windows MTU to 1492 and now ipv6 is working as it should but only on my PC, mobile phones attached to the router are not working with ipv6.
Contacted Ogero about this problem, they did many tests they are still looking for a solution and I also shared what I found with them.
Did anyone face this problem before?
Did the ipv6 test again and this is the result I am getting

After many online research on the MTU issue, I found out that the PPPOE MTU max size on my router is 1492 (the max i can set it to) and Windows original Ethernet interface MTU size is 1500 so i changed the Windows MTU to 1492 and now ipv6 is working as it should but only on my PC, mobile phones attached to the router are not working with ipv6.
Contacted Ogero about this problem, they did many tests they are still looking for a solution and I also shared what I found with them.
Did anyone face this problem before?
I did face the same problem on my Asus Modem. When i enabled ipv6. I had internet for a while then websites stopped working till i turned it off and got back to ipv4. Don't know why. Didn't find a solution yetRamnesia wroteI recently enabled ipv6 on my router, I did the http://test-ipv6.com/ the result was 10/10, ipv6 worked for maybe 2 hours then websites stopped loading or getting incomplete loading.
Did the ipv6 test again and this is the result I am getting
https://i.imgur.com/zq8RydH.png
After many online research on the MTU issue, I found out that the PPPOE MTU max size on my router is 1492 (the max i can set it to) and Windows original Ethernet interface MTU size is 1500 so i changed the Windows MTU to 1492 and now ipv6 is working as it should but only on my PC, mobile phones attached to the router are not working with ipv6.
Contacted Ogero about this problem, they did many tests they are still looking for a solution and I also shared what I found with them.
Did anyone face this problem before?
Ramnesia wroteI recently enabled ipv6 on my router, I did the http://test-ipv6.com/ the result was 10/10, ipv6 worked for maybe 2 hours then websites stopped loading or getting incomplete loading.
Did the ipv6 test again and this is the result I am getting
https://i.imgur.com/zq8RydH.png
After many online research on the MTU issue, I found out that the PPPOE MTU max size on my router is 1492 (the max i can set it to) and Windows original Ethernet interface MTU size is 1500 so i changed the Windows MTU to 1492 and now ipv6 is working as it should but only on my PC, mobile phones attached to the router are not working with ipv6.
Contacted Ogero about this problem, they did many tests they are still looking for a solution and I also shared what I found with them.
Did anyone face this problem before?
That's very strange because IPv6 is working for me without changing anything on all devices.
Do you get a fixed prefix?
Can you explain what you mean?DjSam wroteDo you get a fixed prefix?
my ipv6 prefix I got from Ogero changed every other day or so, as in it was dynamic and not fixed to my account
- Edited
mine is always the same with prefix length /64.
5 days later
This has been solved I just checked
Kareem wroteNot fixed yet. No idea if they're working on it or not. They were surprised about it so I guess it isn't something they set on purpose.DjSam wroteKareem wrote
So I'm back to Beirut, I made some scripts to compare network download speed using Ogero network and VPN.
Check the video below:
https://www.youtube.com/watch?v=A0HoFF7wIrU
I'm in contact with Ogero support, hopefully they will log everything and rule out the issue.
Single connection speed locally is good :
https://i.gyazo.com/f06cfd3ebdf187f5eac34cd47a7aa5b0.png
To Europe, it's a different story :
https://i.gyazo.com/b1492ec6ad2fab4d76d9ec2a7d96b616.png
However, with VPN
https://i.gyazo.com/ec26e9b04232a94bc4bb2ce88194126d.png
I tried using Touch 4G hotspot and it's giving me excellent down speed to Europe as well.
Any update on that? did they try to fix it? or is it in place for consumption purposes?
4 days later
Hello All, anyone living in dawhet aramoun taking from the cabinet after soussa restaurent the big one and having alot of disconnections in internet? They're barely giving the internet. They're saying fuel related. Any information about this? This problem is since like 3 weeks. Thank you
- Edited
I am in that area and I'm having a terrible connection. The modem shows that the connection is up but actually there would be no connection. Its confusing because usually when there is no connection the modem shows that the connection is down. I thought there was a problem with my modem or some noise from my building cabling connections (interference or something like that). But according to what you are saying it seems I dnt have to do any debugging from my side.Moudimadi wroteHello All, anyone living in dawhet aramoun taking from the cabinet after soussa restaurent the big one and having alot of disconnections in internet? They're barely giving the internet. They're saying fuel related. Any information about this? This problem is since like 3 weeks. Thank you