well it's stated here previously regarding the electrical interference it's page 104 anayman_k7's post, and no you are too far away to benefit from VDSL and again no you have too much noise on your line you cant go higher than 1 mbps with 6 db margin.phil.asmar wroteIs there anything i can do to stop this electrical interference?
Will I benefit from anything when the new prices and speeds (VDSL) start?
When i applied for my connection, ogero and sodetel told me your line can handle only 1MBPS, do you think they capped my speed to 1MBps?
Internet in Lebanon - General Questions
I will check what i can do about the SNR if it is due to electrical interference.roudy5 wrotewell it's stated here previously regarding the electrical interference it's page 104 anayman_k7's post, and no you are too far away to benefit from VDSL and again no you have too much noise on your line you cant go higher than 1 mbps with 6 db margin.phil.asmar wroteIs there anything i can do to stop this electrical interference?
Will I benefit from anything when the new prices and speeds (VDSL) start?
When i applied for my connection, ogero and sodetel told me your line can handle only 1MBPS, do you think they capped my speed to 1MBps?
Will the fiber installation be possible for my situation if i am not far from the CO?
The fiber plans aren't very clear yet all we had from Mr. Kreidieh was "Yes if you are close to our network" what does he mean by their network remains to be seen, but i think you are a bit far from the CO, 44 attenuation means you are 3 km+ from the CO...No worries though soon the fiber to the cabinet project will start which will remedy this problem for you and numerous other subscribers.phil.asmar wroteI will check what i can do about the SNR if it is due to electrical interference.
Will the fiber installation be possible for my situation if i am not far from the CO?
Yes i hope this issue is fixed soon.roudy5 wroteThe fiber plans aren't very clear yet all we had from Mr. Kreidieh was "Yes if you are close to our network" what does he mean by their network remains to be seen, but i think you are a bit far from the CO, 44 attenuation means you are 3 km+ from the CO...No worries though soon the fiber to the cabinet project will start which will remedy this problem for you and numerous other subscribers.phil.asmar wroteI will check what i can do about the SNR if it is due to electrical interference.
Will the fiber installation be possible for my situation if i am not far from the CO?
Thank you for your help!
Always my pleasure mate!phil.asmar wroteYes i hope this issue is fixed soon.
Thank you for your help!
- Edited
Same in my case the download speed is above the ADSL modulation limit (11.75) while upload is around the usual limit (1.39)aliessayli2 wrotefor me it drops to 8 i don't know why you're getting 12 it's strange indeedHassan wroteSame. My attenuation drops from 16 to 13 dB.Ahmad Toutounji wrote same
My max rate also drops though from 15 to 12 Mbps which I find a bit strange. Is this normal ? Do any of you guys also witness a drop in max rate when switching to ADSL modulation ?
I would understand if it dropped to 8 Mbps for example since it is the max rate on G.DMT. But since it drops to 12 only, it is obviously not limited by that.

Still think the speed will be limited to 8 unless IDM changes the modulation for the new plans
So i've been going through some of your lines stats, and mine seems very different:
DSL Upstream Rate: 512 kbps
DSL Downstream Rate: 2048 kbps
Down up
DSL Noise Margin: 200 dB 168 dB
DSL Attenuation: 300 dB 468 dB
DSL Transmit Power: -901 dBm -901 dBm
i got those from "router ip"/setup.cgi?next_file=adsl_driver.htm (linksys router)
any idea why i have these huge numbers ?
DSL Upstream Rate: 512 kbps
DSL Downstream Rate: 2048 kbps
Down up
DSL Noise Margin: 200 dB 168 dB
DSL Attenuation: 300 dB 468 dB
DSL Transmit Power: -901 dBm -901 dBm
i got those from "router ip"/setup.cgi?next_file=adsl_driver.htm (linksys router)
any idea why i have these huge numbers ?
Check that same page again because maybe the unit is 0.1 dB as it is in my case (TP link router). then you'd have to divide by 10 to get the actual values
what do u think about my line stats? what speed should i expect from vdsl?
SNR Margin : 23.2 28.3 db
Line Attenuation: 15.8 11.3 db
Data Rate : 8192 511 kbps
Max Rate : 21140 1228 kbps
POWER : 19.8 12.0 dbm
Interleaving is off
SNR Margin : 23.2 28.3 db
Line Attenuation: 15.8 11.3 db
Data Rate : 8192 511 kbps
Max Rate : 21140 1228 kbps
POWER : 19.8 12.0 dbm
Interleaving is off
You should have like 28 mbps+Almighty wrotewhat do u think about my line stats? what speed should i expect from vdsl?
SNR Margin : 23.2 28.3 db
Line Attenuation: 15.8 11.3 db
Data Rate : 8192 511 kbps
Max Rate : 21140 1228 kbps
POWER : 19.8 12.0 dbm
Interleaving is off
Is there a way to get line stats without having a dsl connection?
my friend has cable from a local distributor, but wants to get his dsl line stats..
my friend has cable from a local distributor, but wants to get his dsl line stats..
Not that i know of, you can however send ogero a message and ask them your distance from the CO and max speed, from their reply you can estimate the attenuation.Nemesis-301 wroteIs there a way to get line stats without having a dsl connection?
my friend has cable from a local distributor, but wants to get his dsl line stats..
- Edited
tried that, but they couldn't tell me what the max speed is, and told me to go to the CO of antelias and put a line check request there... (house is in awkar)roudy5 wroteNot that i know of, you can however send ogero a message and ask them your distance from the CO and max speed, from their reply you can estimate the attenuation.Nemesis-301 wroteIs there a way to get line stats without having a dsl connection?
my friend has cable from a local distributor, but wants to get his dsl line stats..
Edit: anybody know of any updates on the official gazette? It's today, right?
Oh sorry to hear that, you contacted them by mail or 1515 ? my friend is also on cable connection and they gave him all the info when he asked, he did by email.Nemesis-301 wrotetried that, but they couldn't tell me what the max speed is, and told me to go to the CO of antelias and put a line check request there... (house is in awkar)
Edit: anybody know of any updates on the official gazette? It's today, right?
both, mailed them twice and called them onceroudy5 wroteOh sorry to hear that, you contacted them by mail or 1515 ? my friend is also on cable connection and they gave him all the info when he asked, he did by email.Nemesis-301 wrotetried that, but they couldn't tell me what the max speed is, and told me to go to the CO of antelias and put a line check request there... (house is in awkar)
Edit: anybody know of any updates on the official gazette? It's today, right?
Oh then no idea how to help honestly.. and regarding the official gazette still no news, the gazette isn't published yet last one was published on 8/6/2017.Nemesis-301 wroteboth, mailed them twice and called them once
- Edited
تفاجأ فريق عمل اوجيرو عند إنضمام المدير العام عماد كريدية لهم لتفقد أعمال تطوير الشبكة بعد أن صادف مروره في منطقة الضبية


He's saying to the fat guy:Nemesis-301 wroteتفاجأ فريق عمل اوجيرو عند إنضمام المدير العام عماد كريدية لهم لتفقد أعمال تطوير الشبكة بعد أن صادف مروره في منطقة الضبية
https://pbs.twimg.com/media/DCXFYTPXoAAzwuT.jpg
''Ok you spent enough time eating in the offices, now it's time to really work''
If it's interesting for anyone, i can post here photos, how fiber repair done in russian telecom.
Mate from.where I can get my line states what is the method to display the above info.Almighty wrotewhat do u think about my line stats? what speed should i expect from vdsl?
SNR Margin : 23.2 28.3 db
Line Attenuation: 15.8 11.3 db
Data Rate : 8192 511 kbps
Max Rate : 21140 1228 kbps
POWER : 19.8 12.0 dbm
Interleaving is off