LebGeeks

vengeance666

Member

Re: Feedback for VISP

vengeance666 - Ogero DSL?

Yes at home and that also applies to 2 internet cafes I go to where people gather and do the same things.

nuclearcat

Member

Re: Feedback for VISP

Then seems changed. or protocols changed.

iron

Member

Re: Feedback for VISP

Its a hit and miss for example it works for dota 2 but doesnt work for planetside 2 etc. whatever requires direct IP connecting.

hussam

Member

Re: Feedback for VISP

meh. nevermind.

Last edited by hussam (August 2 2014)

mezo_8487

Member

Re: Feedback for VISP

In VISP control panel page, i found download speed at 4 Mbit/s (1 Mbit/s), what that mean is it 4 or 1?, and the actual download speed never go over 75 KB/s?, is there any explanation?.

nuclearcat

Member

Re: Feedback for VISP

I will make sure control panel shows correct values, cause there was changes in billing recently.
Hussam - let me know if ur FUP still remains, i will reset it manually. We plan to stop FUP completely soon.

mezo_8487

Member

Re: Feedback for VISP

I will make sure control panel shows correct values, cause there was changes in billing recently.
Hussam - let me know if ur FUP still remains, i will reset it manually. We plan to stop FUP completely soon.

thanks, is it normal to see speedtest result about 0.5 Mbit/s for download and 0.9 Mbit/s for upload? and ping time about 165 ms, can connection issues affect, because I noticed that my reseller connects 8 users to a hub not to switch and then to the access point!.
thanks.

Last edited by mezo_8487 (August 2 2014)

hussam

Member

Re: Feedback for VISP

256 Kbit/s ( 1 Mbit/s )
56 Kbit/s ( 512 Kbit/s )

Right now, I get ~7 to 16 kbytes per second http
most likely FUPed since it is half than the 256k.

PS: Any way I can upgrade to a higher plan?

So yes, FUP looks like it is still there :)

Last edited by hussam (August 2 2014)

nuclearcat

Member

Re: Feedback for VISP

We forgot to upgrade broadband services (there is different servers for resellers and direct services), i will try to contact management tomorrow about this question.

hussam

Member

Re: Feedback for VISP

NC, did you check the FUP thing?

hussam

Member

Re: Feedback for VISP

there also seems to be small packet loss issue to the outside world

ping google.com
PING google.com (173.194.112.67) 56(84) bytes of data.
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=1 ttl=55 time=73.3 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=2 ttl=55 time=70.1 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=3 ttl=55 time=66.8 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=4 ttl=55 time=73.5 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=6 ttl=55 time=80.4 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=7 ttl=55 time=74.6 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=8 ttl=55 time=79.0 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=10 ttl=55 time=81.7 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=11 ttl=55 time=67.2 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=12 ttl=55 time=78.6 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=13 ttl=55 time=66.3 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=14 ttl=55 time=65.2 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=16 ttl=55 time=69.5 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=17 ttl=55 time=69.5 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=18 ttl=55 time=75.5 ms
64 bytes from fra07s29-in-f3.1e100.net (173.194.112.67): icmp_seq=19 ttl=55 time=70.5 ms
^C
--- google.com ping statistics ---
19 packets transmitted, 16 received, 15% packet loss, time 18039ms

no link issue because the ping to internal ip is perfect.

ping 2.2.2.1 -c 10
PING 2.2.2.1 (2.2.2.1) 56(84) bytes of data.
64 bytes from 2.2.2.1: icmp_seq=1 ttl=253 time=7.13 ms
64 bytes from 2.2.2.1: icmp_seq=2 ttl=253 time=9.97 ms
64 bytes from 2.2.2.1: icmp_seq=3 ttl=253 time=8.0 ms
64 bytes from 2.2.2.1: icmp_seq=4 ttl=253 time=13.0 ms
64 bytes from 2.2.2.1: icmp_seq=5 ttl=253 time=14.4 ms
64 bytes from 2.2.2.1: icmp_seq=6 ttl=253 time=11.1 ms
64 bytes from 2.2.2.1: icmp_seq=7 ttl=253 time=15.0 ms
64 bytes from 2.2.2.1: icmp_seq=8 ttl=253 time=14.3 ms
64 bytes from 2.2.2.1: icmp_seq=9 ttl=253 time=11.0 ms
64 bytes from 2.2.2.1: icmp_seq=10 ttl=253 time=10.6 ms

--- 2.2.2.1 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9008ms

HackerPro

Member

Re: Feedback for VISP

I'm suffering from a huge problem now. Everytime I try open I website I'm faced with the infamous "No data recieved" I had to refresh several times to get this page to open and I don't know if my comment will be posted when I click submit. I have been with VISP for 5 years or so and the times that I had a good connection can be counted on fingers. I'm supposed to have a 1Mbps connection or the imaginary "2 Mbps" after the upgrades but all I get is 50kb/s if I'm lucky and Guess What ? When I asked my reseller why the monthly consumption didn't changed he said I have to wait until my account is renewed. I don't get FUP time. Heck, from 3 AM till 8 AM that's the time I use to download my stuff and the time we geeks come alive. I know how much work and effort nuclearcat is putting to give consumers the best experience and I want to thank him for that, and maybe for keep this ISP running. I really appreciate your hard work. But there seems to be a problem somewhere which isn't really fixed.

Last edited by HackerPro (August 11 2014)

nuclearcat

Member

Re: Feedback for VISP

Give me username in private messages, i will check why such problem happen, it is not normal at all.

hussam

Member

Re: Feedback for VISP

NC, I can't connect to "planeshift.teamix.org" port "7777" UDP.
The game support said nothing wrong from their side. Is it possible there is a problem with high UDP ports?

nuclearcat

Member

Re: Feedback for VISP

On VISP side should be no problem, if you are real IP - especially (they are bypassing QoS and any restrictions).
I'm checking real ip traffic now - try to make a connection.

hussam

Member

Re: Feedback for VISP

I am trying now. Cannot connect.

nuclearcat

Member

Re: Feedback for VISP

I see it, they are sending oversized UDP packets that doesn't pass your ppp connection (u have reduced MTU, because of scheme you are connected, it is normal for ppp connections with overhead).
It is generally unsafe to send udp packets 1428 bytes size., they should avoid such practice, as SIP protocol are doing.

nuclearcat

Member

Re: Feedback for VISP

I will try to see how to increase mtu now, try to reconnect your router where pppoe account is set.

hussam

Member

Re: Feedback for VISP

It connects now. Thank you very much NC

NuclearVision

Member

Re: Feedback for VISP

I'm having the same problem can't connect to some servers after 8 pm since couple of days. Is it a national problem?

nuclearcat

Member

Re: Feedback for VISP

Should not be, hussam issue was pretty clear.

Asura

Member

Re: Feedback for VISP

Did VISP remove FUP. I have my internet from the cable guy.before when I log to my "mystat.visp.net.lb/#persinfo" there were a 2 bar about fup that show the percentage before getting fup. but know those 2 bar are always 0 although i download more than 500 MB after 8:00 am. Does this mean that their is no fup.

NuclearVision

Member

Re: Feedback for VISP

Is it possible to download torrents if I change to visp?

hussam

Member

Re: Feedback for VISP

Is it possible to download torrents if I change to visp?

Most likely yes, otherwise someone would have complained by now. You will need a real IP though.

NuclearVision

Member

Re: Feedback for VISP

How can I pay for it? Did anyone try torrents? Nuclearcat any help would be appreciated in this matter.
Hussam thanks man !
Edit: ok I figured out some stuff, how much do v-points cost and where can buy the cards from?

Last edited by NuclearVision (August 30 2014)