It is for educational purposes ;)
Technicolor TG582n software
Look for 10.2.2B
2 years later
- Edited
Technicolor TG582n Firmwares Collection:
CLI/User Guide:
http://www.mediafire.com/download/6xibjxq535gwdcq/TG582n-CLI-Guide.pdf
http://www.mediafire.com/download/qq0jc20sotg65y9/TG582n-User-Guide.pdf
Setup Wizard:
http://www.mediafire.com/download/ylobl2wqrsawdj7/setup_wizard_r8_mh_v1.17.7z
Upgrade Tool:
http://www.mediafire.com/download/b2jq5fbhq6h2pak/Windows_7_Upgrade_Tool.zip
Firmware for Technicolor TG582n software DANT-T Generic:
http://www.mediafire.com/download/u4oqtsyhh63nu36/tg582n.10.2.0.B.bli
Firmware for Technicolor TG582n software DANT-1:
http://www.mediafire.com/download/l5k2at7r97n1x3g/mst_tg582ndb_r10.2.5.2_bm.bin
Other Firmwares Collection:
DANT-T:
http://www.mediafire.com/download/r3sakyf6sdgg3wy/dant-t.rar
DANT-1:
http://www.mediafire.com/download/ccl43c5g3scevsd/dant-1.rar
CLI/User Guide:
http://www.mediafire.com/download/6xibjxq535gwdcq/TG582n-CLI-Guide.pdf
http://www.mediafire.com/download/qq0jc20sotg65y9/TG582n-User-Guide.pdf
Setup Wizard:
http://www.mediafire.com/download/ylobl2wqrsawdj7/setup_wizard_r8_mh_v1.17.7z
Upgrade Tool:
http://www.mediafire.com/download/b2jq5fbhq6h2pak/Windows_7_Upgrade_Tool.zip
Firmware for Technicolor TG582n software DANT-T Generic:
http://www.mediafire.com/download/u4oqtsyhh63nu36/tg582n.10.2.0.B.bli
Firmware for Technicolor TG582n software DANT-1:
http://www.mediafire.com/download/l5k2at7r97n1x3g/mst_tg582ndb_r10.2.5.2_bm.bin
Other Firmwares Collection:
DANT-T:
http://www.mediafire.com/download/r3sakyf6sdgg3wy/dant-t.rar
DANT-1:
http://www.mediafire.com/download/ccl43c5g3scevsd/dant-1.rar
4 years later
I updated my TG582N using the firmware version provided in
Firmware for Technicolor TG582n software DANT-T Generic:
tg582n.10.2.0.B
all worked ok, but it seems that the GUI log in name and password are changed
i tried all combination i know nothing worked.
can anybody help with the default user name and password that comes with this firmware
Firmware for Technicolor TG582n software DANT-T Generic:
tg582n.10.2.0.B
all worked ok, but it seems that the GUI log in name and password are changed
i tried all combination i know nothing worked.
can anybody help with the default user name and password that comes with this firmware
did you try
user: admin
password: SerialNumber (the one on the modem sticker)?
user: admin
password: SerialNumber (the one on the modem sticker)?
Yes I did try this one. It seems that the new password is set by ramx as part of the firmware he posted.
it look like it is the password of the ISP he was subscribed to.
In all cases, if we fail to get the password, is any other way around. like a flash memory or something?
or shall i forget about this modem and buy a new one?
it look like it is the password of the ISP he was subscribed to.
In all cases, if we fail to get the password, is any other way around. like a flash memory or something?
or shall i forget about this modem and buy a new one?
- Edited
Try this (Second important point : The router previously had admin @ admin as user and password, now administrator without password;)
Username : Administrator or administrator or admin or Admin
Password : (blank)
I stopped using the modem since I switched to VDSL
Username : Administrator or administrator or admin or Admin
Password : (blank)
I stopped using the modem since I switched to VDSL
wollyka wroteTry this (Second important point : The router previously had admin @ admin as user and password, now administrator without password;)
Username : Administrator or administrator or admin or Admin
Password : (blank)
I stopped using the modem since I switched to VDSL
None of the suggested combination worked. :(
is there anyway to move around the password. like a master rested or something similar?
or nothing exist like that?
or nothing exist like that?
Reset router by pressing the reset button for 10 seconds. But please be advised that all the information will be lost such as ISP username and password for the DSL, settings etc..
You should be able to log in using the default credentials
You should be able to log in using the default credentials
Try 'user' as username and password mine used to have these credentials