Me too.. You think my motherboard can change ANY voltages? I had to go on stock volts to oc the e5400 and i was able to hit 3.5 which is amazing, on stock volt most pople reach 3.2). But you can oc the 560 ti, that was my main point.
Beej wroteMe too.. You think my motherboard can change ANY voltages? I had to go on stock volts to oc the e5400 and i was able to hit 3.5 which is amazing, on stock volt most pople reach 3.2). But you can oc the 560 ti, that was my main point.
I just did OC my card
to 1GHz :)
Grats, i see you used smart doctor. Also what benchmarks/games/ apps did you use to test if its 100% stable?
Also why show no love for them mem? Dont leave anything @ stock speeds ;).
Beej wroteGrats, i see you used smart doctor. Also what benchmarks/games/ apps did you use to test if its 100% stable?
Also why show no love for them mem? Dont leave anything @ stock speeds ;).
i never did check for stability,because i had no time
but i used it on the oc for like an hour and it was OK
i haven't oc-d it since
Benchmark: Furmark, OCCT.

Furmark bulletproof for temps, OCCT bulletproof for stability...dont forget to enable error-checking.
whoaa, well, i have my Q6600 @ 3.44
i havn't overclocked my EVGA gtx460 EE but ive used the free performance boost bios update from evga, so its now 720mhz core, idk what the default was
yasamoka wroteBenchmark: Furmark, OCCT.

Furmark bulletproof for temps, OCCT bulletproof for stability...dont forget to enable error-checking.
yes those are good tests
shant wrotewhoaa, well, i have my Q6600 @ 3.44
i havn't overclocked my EVGA gtx460 EE but ive used the free performance boost bios update from evga, so its now 720mhz core, idk what the default was
OCing is allowed
Even when you oc to 2ghz :P, at idle the clocks and voltages will drop to stock. Which is 51mhz on the core, while voltages depend. Its not easy to get 1ghz stable on a 560 :). We will have to wait until you bench heaven, which stresses the card pretty good.

@ shant: 675mhz and 3600 memory. FPB by evga is a gimmik that makes all card SC versions.
Beej wroteEven when you oc to 2ghz :P, at idle the clocks and voltages will drop to stock. Which is 51mhz on the core, while voltages depend. Its not easy to get 1ghz stable on a 560 :). We will have to wait until you bench heaven, which stresses the card pretty good.

@ shant: 675mhz and 3600 memory. FPB by evga is a gimmik that makes all card SC versions.
i don't have much experience of OC ing but im slowly getting the hang of it :)
ok i am almost done with the benchmarking software list...
i just want to know , who's in this thing? so that i know how to make the top 5/10 or whatever
These are the final benchmark list
and also
MSI AfterBurner http://event.msi.com/vga/afterburner/download.htm
and Just Cause 2 (benchmark on "Concrete Jungle")
and as for the Uigine Heaven (everything on high including translations{the thing while running})
you post your results in this post and i will create another post where ill announce the top 5 or 3 or whatever (depends on how many people)

memory test g.skill downscale from 2000 to 1866 ghz because of instability at stock speed

ill download the rest at night.
Your DA MAN stuntman... Kepp on going.
Also at what volts are your rams? For quick runs you can up the volts to 1.6-1.65v.

Edit: Stunt man your doing your ram wrong... 3T??? why is that? Also since yu basicly "underclocked them" you can tighten the timings alittle more. Tweak alittle and you can achieve higher score, but all in all your number one (y).
My results :
MaxxMem:
my rams are just normal everyday 1333Mhz Kingston DDR3 ram on dual channel
MSI AfterBurner:
Cinebench :
Heaven 2.5:
on MAXXXXXXXXXXXXXXXXXXXXXX
Just Cause2:
i overclocked my 560TI to 971MHz
my CPU to 3.57GHz
and my ram to 1520MHz
Avo you will have to run heaven again at 1920x1080 since your results are on 1280x720.
Also the last benchmark is not farcry2 its just cause 2, and you will have to run it again and disable v-sync, as it will limit your FPS. Disableing v-sync will push ur gpu more and give better/more fps.
My benchs will come but abit late...
Nice results...
Beej wroteAvo you will have to run heaven again at 1920x1080 since your results are on 1280x720.
Also the last benchmark is not farcry2 its just cause 2, and you will have to run it again and disable v-sync, as it will limit your FPS. Disableing v-sync will push ur gpu more and give better/more fps.
My benchs will come but abit late...
Nice results...
i can't run heaven on 1920x1080 :(
and thanks for the correction of the game , i don't know why i always think about farcry 2 ,iv never played it xD
ill upload the new justcause benches in a bit
Beej wroteYour DA MAN stuntman... Kepp on going.
Also at what volts are your rams? For quick runs you can up the volts to 1.6-1.65v.

Edit: Stunt man your doing your ram wrong... 3T??? why is that? Also since yu basicly "underclocked them" you can tighten the timings alittle more. Tweak alittle and you can achieve higher score, but all in all your number one (y).
Thanks Beej, yea i just noticed that its 3T while it should be 2T, tweaked my bios settings and now running them @1.65V



Even more i've increased the cpu from 43 timer to 44 and still stable i hope no bsod soon :)
wait wait, this makes no sense at all, everyone is running a different resolution, i suggest we all run on 1280x720
also, why are we doing ram tests? aren't we supposed to do cpu and gpu ?

edit: im have not overclocked my ram nor tightened the timings, in fact ive downclocked them to achieve better cpu, im not even done with the processor oc, i can achieve a lot more if i get that mx4 and a decent heatsink ;) (currently out of cash)