• Gaming
  • Tutorial for Configuring Your PS3/X360 for online & port forwording

Hi everyone, this is my 2nd tutorial that I post here, hope u like this one.

I guess the X360 have the same network settings as the PS3.

You need to know your Nat Type & fix it
Type 1 - Is good, all ports are Open - Best
Type 2 - Is good, not all ports are Open - Recommended
Type 3 - You can connect, & play, but alot of features are disabled - Minimum

Access Points, Routers, Modems ...

This is my Network Setup

Dlink Dir-300 wireless 4 Ethernet ports Router

Thomson Speed-touch 510v6 1port Modem

I had a Type 3 Nat for a while now, & I've been unable to connect to online MP Games, especially on consoles games that use matchmaking systems ie (Uncharted 2 & MW2) but Killzone 2 works good.

Yesterday I've changed the Dlink Router into an Access Point, & I was able to get a Nat 2 Type on PS3, yet when connecting to uncharted 2 I keep getting synchronizing error. due to the modem not forwarding the ports for the Uncharted 2 Game.

Uncharted 2 game uses the port 443 TCP for online connection, & since my router is an Access Point, there is no need to open ports on it or to enable DMZ & using DHCP is disabled.

so what you need to do is:
1 - Enable UPnP on both Console & Modem, (router is disabled since its an access point)
2 - Give a static IP to your console, preferably from the Network settings in the console & not from the modem.
3 - Make Sure that the Static IP you gave your console is different & not in the range of the DHCP of your modem.

4 - You should now test the connection, You should get a NAT 2 type. if not then follow on.

5 - Forword the ports needed for the PS3/X360 (or the game) on your modem, each modem/router have a different setup so check
www.portforward.com.com for your modem.
check for the ports needed for ur console

6 - now u should be able to cennect to the game that use match making system
7 - if not Disable UPnP on the Modem, but now u'll get Nat 3 as in my case, but will be connected to others & quickly.

big thanks to Kareem, as all of this wouldn't happen if I didnt try to help him & ending up fixing my problem.

PS: our internet sucks
Thanks for the tutorial. Glad both of you sorted it out.
As an advice, if Shatilov's tutorial didnt work consider turning off your modem and router(if you have) for about 10 minutes.
Since the day i bought the PS3 i was working on getting NAT 2 which is that your connected through a router not directly to your modem with the ports open.

To add up on the Tutorial my setup is:

ISP: IncoNet Data Management
Plan: 512k ADSL
Modem: Thomson Speedtouch 546v6
Router: Cisco Linksys WRT 120-N

I didnt actually do anything on my setup everything is on automatic even DHCP(for LAN) on my router is enabled. But i did DMZ my router on the modem on a fixed IP, you have to first enable DHCP to assign an IP for your router then check the box which says Always use the same address.
Here is the screen where you should DMZ the router:


Now you should tweak your Router by Forwarding the ports on your router(tried dmzing on the router but it didnt work) so disable both DMZ and NAT on the Router:
Ports

DMZ

NAT


As a side note update your router and modem to the latest firmware.
Modem Firmware Upgrade for Speedtouch 546
Cisco LinkSys WRT120-N How to
Version 1.0.0.5
Disclaimer: I dont take any responsibility to any mistake you do. Do it at your own risk.