Internet accelerator

nuclearcat · 2010-06-03T17:59:11+00:00

Anybody want to try my accelerator? I have 2 test accounts (soon more) It is in beta stage now, with GUI. Actually it is mature product, but before it was to...

nuclearcat

yes, it should retrieve configs... weird
Which ISP u are? VISP or other now?

wollyka

i am loosing connection to the net when the program is running.. when i quit the net is restored..
the program is running, but in the statistics i can see that i am only sending not receiving any packets.. and yes i allowed the program access thru the firewall

nuclearcat

wollyka - what is your gateway ip?

hj88

yes i am on visp
my ip is 172.16.142.104

i am connected through kerio winroute firewall but all the application p2p ... works fine

nuclearcat

wollyka - probably ur ISP block udp, not sure about that
try one more time, i am checking now traffic from your ip

did you change mtu? is it default or something else?

nuclearcat

hj88 - checking logs, if there is any problem from VISP side..
kerio on same pc or another pc?

wollyka

i am on mobi and it shows 14.14.14.14
also got this from the program log

SetRoute. replace=0. 
Route table (size 3160):
Dst: 0.0.0.0 Mask: 0.0.0.0 Via: 192.168.0.1 Met: 562
 DEF 
Dst: 0.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 10.0.135.12 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 127.0.0.0 Mask: 255.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 127.0.0.1 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 127.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 128.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 192.168.0.0 Mask: 255.255.255.0 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.2 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
found default route: Dst: 0 Mask: 0 Via: 100a8c0 Met: 562
found tun route: Dst: e0 Mask: f0 Via: c87000a Met: 286
Set server route success
Set default route 1 failed. Error code:5010 
Set default route 2 failed. Error code:5010 
Route to globax server removed.
SetRoute. replace=0. 
Route table (size 3160):
Dst: 0.0.0.0 Mask: 0.0.0.0 Via: 192.168.0.1 Met: 562
 DEF 
Dst: 0.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 10.0.135.12 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 127.0.0.0 Mask: 255.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 127.0.0.1 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 127.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 128.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 192.168.0.0 Mask: 255.255.255.0 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.2 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
found default route: Dst: 0 Mask: 0 Via: 100a8c0 Met: 562
found tun route: Dst: e0 Mask: f0 Via: c87000a Met: 286
Set server route success
Set default route 1 failed. Error code:5010 
Set default route 2 failed. Error code:5010 
Route to globax server removed.
SetRoute. replace=0. 
Route table (size 3160):
Dst: 0.0.0.0 Mask: 0.0.0.0 Via: 192.168.0.1 Met: 562
 DEF 
Dst: 0.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 10.0.135.12 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 127.0.0.0 Mask: 255.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 127.0.0.1 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 127.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 128.0.0.0 Mask: 128.0.0.0 Via: 10.0.0.1 Met: 286
Dst: 192.168.0.0 Mask: 255.255.255.0 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.2 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 192.168.0.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 127.0.0.1 Met: 306
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 192.168.0.2 Met: 276
Dst: 224.0.0.0 Mask: 240.0.0.0 Via: 10.0.135.12 Met: 286
 TUN 
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 127.0.0.1 Met: 306
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 192.168.0.2 Met: 276
Dst: 255.255.255.255 Mask: 255.255.255.255 Via: 10.0.135.12 Met: 286
found default route: Dst: 0 Mask: 0 Via: 100a8c0 Met: 562
found tun route: Dst: e0 Mask: f0 Via: c87000a Met: 286
Set server route success
Set default route 1 failed. Error code:5010 
Set default route 2 failed. Error code:5010 
Route to globax server removed.

[03/06/2010 23:49:23][2908]Globax started v5.0.10-beta Build May 31 2010 21:47:58
[03/06/2010 23:49:23][2908]close session format: udp_in/out/tcp_in/out
[03/06/2010 23:49:23][2908]Starting tunnel dll.IP: c87000a port:b90b Timeout 30 seconds
[03/06/2010 23:49:25][2908]Tunnel start OK
[03/06/2010 23:49:25][2908](traf)UDP IN/OUT/ TCP IN/OUT: 0/0/0/0 
[03/06/2010 23:49:25][2908]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:49:35][2908]close session 'globax' 1b72fc6 0/149/456/0 (0 online)
[03/06/2010 23:49:35][2908]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:49:45][2908]close session 'globax' 5f7d4a16 0/149/358/0 (0 online)
[03/06/2010 23:49:50][2908]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:50:04][4532]Globax started v5.0.10-beta Build May 31 2010 21:47:58
[03/06/2010 23:50:04][4532]close session format: udp_in/out/tcp_in/out
[03/06/2010 23:50:04][4532]Starting tunnel dll.IP: c87000a port:b90b Timeout 30 seconds
[03/06/2010 23:50:13][4532]Tunnel start OK
[03/06/2010 23:50:13][4532](traf)UDP IN/OUT/ TCP IN/OUT: 0/0/0/0 
[03/06/2010 23:50:15][4532]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:50:25][4532]close session 'globax' 25b6313 0/149/178/0 (0 online)
[03/06/2010 23:50:27][4532]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:50:37][4532]close session 'globax' 7868194b 0/149/89/0 (0 online)
[03/06/2010 23:50:43][4532]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:50:53][4532]close session 'globax' 7e63791a 0/149/89/0 (0 online)
[03/06/2010 23:51:14][4532](traf)UDP IN/OUT/ TCP IN/OUT: 0/447/356/0 
[03/06/2010 23:51:24][4532]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:53:41][4772]Globax started v5.0.10-beta Build May 31 2010 21:47:58
[03/06/2010 23:53:41][4772]close session format: udp_in/out/tcp_in/out
[03/06/2010 23:53:41][4772]Starting tunnel dll.IP: c87000a port:b90b Timeout 30 seconds
[03/06/2010 23:53:46][4772]Tunnel start OK
[03/06/2010 23:53:46][4772](traf)UDP IN/OUT/ TCP IN/OUT: 0/0/0/0 
[03/06/2010 23:53:47][4772]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:53:57][4772]close session 'globax' 50f2819 0/149/213/0 (0 online)
[03/06/2010 23:54:13][4772]connect to 'globax' 62.141.48.117:30000
[03/06/2010 23:54:23][4772]close session 'globax' 621135ec 0/149/126/0 (0 online)

all is default except speed set to 512

hj88

it is default

hj88

kerio on another pc

nuclearcat

wollyka, terrible, seems they are blocking UDP. Try to disable firewall for a minute and try to work, still maybe windows firewall doing something, if wont help - then i will try to see if i can add another port on server

wollyka

ok it worked now but it is slow.. and the traffic page i am not seeing any received packets even though i can connect now..

nuclearcat

hj88 make sure kerio is not blocking request. It should pass, cause on VISP i test few times and for few people accelerator.
In worst case - we can put config manually, but thats not nice.

nuclearcat

wollyka wroteok it worked now but it is slow.. and the traffic page i am not seeing any received packets even though i can connect now..

I guess it is not connected, i am checking traffic now, i dont see any real traffic exchange.

wollyka

ok let me see if i installed it on my other pc (direct connection to the net)

samer

Denys, would the Linux one work on OS X? If so, could you pm me?

hj88

i do not have anything blocked on kerio. udp is working perfectly

i do not have any anti virus or firewall installed on my pc.

nuclearcat

samer wroteDenys, would the Linux one work on OS X? If so, could you pm me?

No, but i am planning to compile native for OS X after while.

nuclearcat

config retrieval over TCP, let me try to check ur interface on pppoe
give me username in PM please

wollyka

same on my other pc.. seems mobi is blocking udp?

nuclearcat

wollyka - maybe this specific port, later on i will add one more port on server, probably they don't block it
But i need at least 30 min, to check other issues also

hj88 - it must contact over port 80, do you have any restriction on kerio? (like blockign port 80 so people must put proxy in their setup)

« Previous Page Next Page »