Ramii
Hi guys I install a new repeater "Edimax EW-7416APn" in my boss house. he has the regular technicolor adsl router from Ogero... i configure the repeater and everything went good. but after 24-48 hours the repeater stop to work and if any device try to connect to the repeater it will try to obtain an IP address but without a result.. i tried to disconnect and reconnect but same results.. i tried several devices and also same result ( The device try to obtain an ip address but without a success).. i tried to restart the adsl router and then the repeater and the problem persist. I must reconfigure the repeater every time the problem occur to solve it. I dont have any idea about the reason.
PS :
-The repeater work perfectly after the reconfiguration on all devices
-I puted the same password and password type on the repeater that exist on the adsl router
Thank you in Advance!
Tarek
What troubleshooting did you do ?/
Prince
Try this way go to the EdiMax Router System Utility enable DHCP Server and put the same DHCP setting on the Technicolor
which are those
IP Address :
Subnet Mask :
Gateway Address :
and save and it should work normally from now on.