samsung s2 problem

unbreakable

this is the worst day of my life i've rooted my samsung s2 and something went wrong when it boot it just stucks on the galaxy s2 logo and don't load the software why? And how to reload software i alredy have cms restore and the software would anyone help me for godness sake pleeeeeaaaaaassssee it's the second 450$ i have trown away

djunited

Can you get into download mode? If so reflash stock kernel using odin

m-sabra

how have you rooted it ? please specify the procedure you followed with links to the files you used.(this is just to know why you bricked)

second like djunited said,if you can access download mode (power + home + vol down) you will just need to flash a new firmware and it will boot most probably.

unbreakable

i can get it into download mode but it minght be that i've downloaded a wrong kernel and i dunno wich one is the right one

Metalloy

is ot the first time you flash cyanogenmod?

m-sabra

Metalloy wroteis ot the first time you flash cyanogenmod?

he didn't mention cyanogenmod.he was rooting the device which is done by flashing a custom kernel (CFroot),so he needs to reflash a new kernel,or a new firmware to fix the problem.

@unbreakable can you give me your device current firmware ? you should have noted this down.

Metalloy

I missunderstood cms I guess.

yasamoka

Dude this is a soft brick, nothing serious. It can easily be fixed. just follow instructions one by one and you should be fine. what happened to your previous phone? And why are you rooting if you can't fix a soft brick?

unbreakable

Android version 2.3.6 that's what i wrote down

can we fix it easily or not ?

AvoK95

Do this

m-sabra

ok so i got in contact with unbreakable and we were able to solve the problem and got the device working again.
to anybody who could face a similar problem in the future here's what was the case,and how it was solved.

-the device in question is the galaxy s2 I9100G it was soft bricked after being flashed by an I9100 kernel in order to root it.
so a tip for everybody,make sure of the type of your device and that the package you have is compatible with it before flashing

-the device was recovered by accessing the download mode (pressing vol up+ hom + power at the same time)
then flashing a correct firmware to the device.

that's the problem and how it was solved basically.so make sure in the future to check what are you flashing before doing it.