- Edited
@The-MMMs: I'm thinking of getting one. I will provide a full review if I do. The review may have to wait 3 weeks though. Officials...
CoD Modern Warfare 3 – Game Thread
take as much time as you need !!
and good luck ! ^_^
and good luck ! ^_^
- Edited
{Administrator}=>:connection unbind application=CONE(UDP) port=69
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=3074
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=3478-3479
Failed to delete CONN binding.
{Administrator}=>:connection unbind application=CONE(UDP) port=88
Failed to delete CONN binding.
{Administrator}=>:connection bind application=CONE(UDP) port=55-66
{Administrator}=>:connection bind application=CONE(UDP) port=68-499
There exist already a binding with an overlapping portmap.
{Administrator}=>:connection bind application=CONE(UDP) port=501-5059
{Administrator}=>:connection bind application=CONE(UDP) port=5061-7647
{Administrator}=>:connection bind application=CONE(UDP) port=7649-27009
{Administrator}=>:connection bind application=CONE(UDP) port=27012-65353
{Administrator}=>i realize i must have opened all the ports and that i'm vulnerable to attacks.
However, my modem is connected to a router.
I'm only connecting the modem directly to the PS3 .
Edit: didn't work
12 days later
Well im out of ideas.
I tried
(yes that is right it shows some errors but that's supposed to happen)
I tried
(yes that is right it shows some errors but that's supposed to happen)
- Edited
@Chup if your modem is a Speedtouch 546v6 i can help. Is it?
I have my PS3 connected through a 120N LinkSys, with NAT 2.
I have my PS3 connected through a 120N LinkSys, with NAT 2.
@Kareem it is! and you are with IDM, woohoo! But wait, i do have type 2, but in MW3 getting a Strict NAT. That's my issue. But do share your wisdom i need all the help i can get.
- Edited
There is no DMZ button on the modem, i think you know that. All you have to do is:
1- Switch your Router to DHCP leasing on the modem.
2- Go to Home Network
3- Press on your Router which should be displayed by default as: Unknown-00-00-00-00-00-00 with the zeros being the MAC address of your router. Unless you have Named the router before.
4- In the buttom of the page there is a pick a task... press on Assign the public IP address of a connection to a device.
5-There should be a drop down list button that you should press and your router's name or MAC as it has been displayed before in 3rd step. After you select it click assign.
Now you will get a notification to release your current IP and renew it. You can either do it via your browser by accessing the router, there should be an option to do it (i have it). Or simply restart the router.
To check if everything is as it should be, the IP of your router should not be 192.168.1.XX it should start with 10.XX.XX.XX, at least mine does.
Note: If in step 1 you didnt notice that the router is on DHCP leasing then simply restart the router, and modem if necessary.
NOTE 2:That modem has a lot of problems and bugs that are never solved, like forwarding the ports. So to make this clear my Firmware version is 7.2.0.8.
Typical Note: I am not responsible to any damage done to your home network.
1- Switch your Router to DHCP leasing on the modem.
2- Go to Home Network
3- Press on your Router which should be displayed by default as: Unknown-00-00-00-00-00-00 with the zeros being the MAC address of your router. Unless you have Named the router before.
4- In the buttom of the page there is a pick a task... press on Assign the public IP address of a connection to a device.
5-There should be a drop down list button that you should press and your router's name or MAC as it has been displayed before in 3rd step. After you select it click assign.
Now you will get a notification to release your current IP and renew it. You can either do it via your browser by accessing the router, there should be an option to do it (i have it). Or simply restart the router.
To check if everything is as it should be, the IP of your router should not be 192.168.1.XX it should start with 10.XX.XX.XX, at least mine does.
Note: If in step 1 you didnt notice that the router is on DHCP leasing then simply restart the router, and modem if necessary.
NOTE 2:That modem has a lot of problems and bugs that are never solved, like forwarding the ports. So to make this clear my Firmware version is 7.2.0.8.
Typical Note: I am not responsible to any damage done to your home network.
Will try this.
Danke for your time
Danke for your time
5 days later
whoever wants to play with me private matches add me:bassel--bs on psn
I may be a low level but i am really good.
I may be a low level but i am really good.
2 months later
I just installed teknogods mw3 and when i refresh the server list there is like only 33 servers with 434 players ...Is there something wrong here ? Because i read somewhere here that they have like 200 000 players !
21 days later
This is caused by your internet connection having high ping latencies and slow speeds.OnLiNe wroteI just installed teknogods mw3 and when i refresh the server list there is like only 33 servers with 434 players ...Is there something wrong here ? Because i read somewhere here that they have like 200 000 players !
16 days later
Guys on PS3, if we get like 6 or more ppl to add me on PSN, (ID: KhalzSmD) we'll play for like 2hrs tonight (7-->9) or whatever suits you guys. Please someone support this!
you're quite late for the mw3 times but i'll pm you my psnIDapplelover wroteGuys on PS3, if we get like 6 or more ppl to add me on PSN, (ID: KhalzSmD) we'll play for like 2hrs tonight (7-->9) or whatever suits you guys. Please someone support this!