840/1680/1050 @1.025v seems the most reliable to me right now. and Beej when i placed the 80mm above the card, it went to 95c iin 2-3 mins. I ditch it under the card, it takes away 3-4c, but really really noisy, I'm hearing music all the time cause it's really loud :/. I'll remove it tonight when i finish testing my overclocks.
I'll re-overclock my CPU now, just need to take the bios pictures, and post them, so you guys know what I'm encountering.
Ok, now here we go, I wont apply any settings although I put the OC settings in the 1st pic:
-For the CPU:
1) Change MCH/ICH voltage override from 1.1 to 1.2
2) Change host clock freq. override to manual with 400Mhz
-For the RAM settings:
1) just automatic settings, that are shown as 1333 while it run at 1600Mhz, donno how!! :/
2) If the settings are changed to manual, whatever the settings I try, the PC wont boot, it just give me 3short beeps.
So what settings should I apply, these settings are working good, I want to know how I can make them better.
P.S: When I overclock, each time I turn on my PC from a complete power off, I have to enter the bios, and just go to the first pic, and then save & exit, so the overclock works. I still dont know why :o .
