140 for cpu
Bid on my computer parts
grrrrrr!
10,000$ for cpu!
joking :P
a used core 2 quad isn't worth 140 :\
nemesis, what board are you going to pair up that Q9550 with? :(
10,000$ for cpu!
joking :P
a used core 2 quad isn't worth 140 :\
nemesis, what board are you going to pair up that Q9550 with? :(
- Edited
<moderator edit: removed useless post />
- Edited
I think I wasn't clear, the bid ends Sunday 9/10/2011 6:00PM exactly, still there's plenty of time, just if someone is out of town, or grounded and can't access the internet :P, or .....AvoK95 wrotegoing once ....
going twice ......
SOLD ? :P
that's up to
ILIA_93
to decide
Thank you guys for being mature people, I though that some trolls will wreck this topic. Keep it up, and keep it real, don't put a price you can't afford so no one else loses the chance to get a part he wants.
@Shant: Hurtfulllllllllll, now my CPU don't worth 140$, you heart me deep man :p. It's still for the same price I got it (300$), it's still an amazing CPU, and you should know that since you own a Q6600.
@Avok95: Thanks for trolling!!!
the intel g31shant wrotegrrrrrr!
10,000$ for cpu!
joking :P
a used core 2 quad isn't worth 140 :\
nemesis, what board are you going to pair up that Q9550 with? :(
- Edited
ARE YOU NUTS!!Nemesis-301 wrotethe intel g31shant wrotegrrrrrr!
10,000$ for cpu!
joking :P
a used core 2 quad isn't worth 140 :\
nemesis, what board are you going to pair up that Q9550 with? :(
it REALLLLY isn't worth it
you should COMPLETELY change your rig man
and i don't think that this CPU would even WORK without a bios update
i mean you're going for the wrong direction by upgrading your rig
380$ for the set :~).
- Edited
I was going to ask nemesis the same question, but i didnt cause i dont want to interfere...
But now i do, nemesis you will NOT be able to run that cpu appropriately.
I will not take sides here, but i will be technical. A g31 board supports 800fsb stock, and supports 1333 fsb in OC mode. Now if your ram doesnt allow you to oc, you will not be able to overclock your fsb to 1333mhz.
Imagine this, your overclocking to run the cpu @ stock!!!. And i am sure you will not be able to hit those speeds as there are two variables: 1) motherboard and 2) ram.
If your motherboard allows for voltage tuning AND ram divider (where you can choose the ratio between fsb and ram) you will be able to run the cpu @ stock settings while your actually ocing (hope you got my point).
Nemesis your wasting your $ on nothing and making it harder on shant. So be carefull, you dont want to pay $ for nothing.
And if your board is intel generic, you will not be able to oc at all.
But now i do, nemesis you will NOT be able to run that cpu appropriately.
I will not take sides here, but i will be technical. A g31 board supports 800fsb stock, and supports 1333 fsb in OC mode. Now if your ram doesnt allow you to oc, you will not be able to overclock your fsb to 1333mhz.
Imagine this, your overclocking to run the cpu @ stock!!!. And i am sure you will not be able to hit those speeds as there are two variables: 1) motherboard and 2) ram.
If your motherboard allows for voltage tuning AND ram divider (where you can choose the ratio between fsb and ram) you will be able to run the cpu @ stock settings while your actually ocing (hope you got my point).
Nemesis your wasting your $ on nothing and making it harder on shant. So be carefull, you dont want to pay $ for nothing.
And if your board is intel generic, you will not be able to oc at all.
well yes its a good(epic) processor(for overclocking), but wayyyyy outdated, a little more than 140 and you can get an i5 :P
- Edited
sir, you are crazy, Q9550 E0 stepping for G31 chipset?...did i say crazy? i meant that is insane!Nemesis-301 wrotethe intel g31shant wrotegrrrrrr!
10,000$ for cpu!
joking :P
a used core 2 quad isn't worth 140 :\
nemesis, what board are you going to pair up that Q9550 with? :(
so my motherboard will underclock the cpu?wtf?
your hardware is WAAY WAAAAAAAAAAAAAY too outdatedNemesis-301 wroteso my motherboard will underclock the cpu?wtf?
your still using DDR2 (for crying out loud)
your FSB is 800
you need a new board , processor , ram and graphics card
it would be like Lamborgini Body with a VW engine
so I guess then I'll cancel my bid of 140$, mabrouk shant!
- Edited
thanks nemesis,sorry for the bad news though, a Q6600 would go nice with your setup
so i guess ill restart the bid, i bid 110 for the cpu
so i guess ill restart the bid, i bid 110 for the cpu
hey why is your Direct X version 10 ?ILIA_93 wroteSome more information to make everything clear:
http://www.elmazad.com/files/imgs/12741067501.jpg
http://www.elmazad.com/files/imgs/12741078474.jpg
http://www.elmazad.com/files/imgs/1274109707.jpg
Guys for everything, the bid starts at 405$. Can't be less than that, It's enough that I'm losing it for this price due to traveling.
- Edited
See the GPU-Z Avok95, not windows specifications.
Yeah Shant you have the right to restart it:
-Intel Q9550 for 110$ (Shant)
-Geforce GTX460 1GB for 110$ (thegodfatherdany)
And please make sure your rig support these parts before bidding.
Yeah Shant you have the right to restart it:
-Intel Q9550 for 110$ (Shant)
-Geforce GTX460 1GB for 110$ (thegodfatherdany)
And please make sure your rig support these parts before bidding.
thank youILIA_93 wroteSee the GPU-Z Avok95, not windows specifications.
Yeah Shant you have the right to restart it:
-Intel Q9550 for 110$ (Shant)
-Geforce 1GB for 110$ (thegodfatherdany)
aren't you interested in selling the entire set?
I need some time to have money to buy the GTX 460 so if someone bought all the case would not be a problem!
Yeah, I'm sorry shant, if only you wanted the cpu, I'll have to sell the case to ali. But ali 400$ is as low as it can gets. I can't just sell the cpu, and stay with all other parts.
But there's plenty of time left. We'll see what will happen.
But there's plenty of time left. We'll see what will happen.